logo今天是:  
首  页 | 公司简介 | WEICON产品 | 新闻中心 | 技术资讯 | 联系我们
WEICON金属填补胶
WEICON金属修补棒
WEICON强力结构胶
WEICON环氧胶
WEICON聚氨酯粘合剂
WEICON弹性密封胶
WEICON硅胶
WEICON瞬间胶
WEICONLOCK厌氧胶
WEICON Plast-O-Seal
WEICON金属喷剂
WEICON清洁喷剂
WEICON防腐润滑喷剂
WEICON工艺液
WEICON防卡剂
WEICON多功能润滑剂
WEICON剥线钳
 

 
WEICON Easy-Mix PU 240 50ml Polyurethane Adhesive

WEICON Easy-Mix PU 240高强度双组份聚氨酯粘合剂

WEICON Easy-Mix PU 240高强度双组份聚氨酯粘合剂是高强度的、快速固化的、双组份聚氨酯强力结构胶,适合各种材质粘贴。

High-strength, fast-hardening 2-component structural adhesives based on polyurethane with excellent adhesion on a broad range of materials. The high-viscosity formulation enables application even on vertical surfaces. The 2-component system also provides for fast and controlled curing. This makes the adhesive bonding process virtually independent of layer thickness, humidity and ambient temperature.

The following materials can be bonded among themselves or to each other with a high tensile, shearing and impact strength:
Fibre composite materials (e.g. EP-GRP, UP-GRP, CFC, SMC and fibreglass)
Plastics (e.g. PVC, ABS, PMMA, PC and phenol)
Polyurethane, epoxies and polyester
Steel, aluminium and stainless steel
Wood, ceramic, etc.

WEICON Easy-Mix PU-90/PU-240 adhesives are characterised by the following properties:
Fast initial strength
Immediate adhesion even on vertical surfaces, no dripping, can be modelled
High tensile, shear and impact strengths
Permanently elastic/impact resistant, low shrinkage
For indoor and outdoor use
Resistant to weathering and chemicals
Can be sanded and painted over after approx. 30 minutes
Neutral to materials
Temperature resistant from -55°C (-67°F) to +125°C (+257°F)

WEICON Easy-Mix PU-90/PU-240 adhesives are suitable both for universal use in dynamically loaded adhesive bonds and for applications where a high flexibility is required. They are used in the following industrial sectors:
Plastics technology
Mechanical engineering
Model and mould construction
Ship and boat building
Energy systems and electrical engineering
Metalworking
Car body and vehicle construction
Trade fair and exhibition construction

Processing:

The conditions for proper adhesive bonding are clean and dry surfaces (e.g. after cleaning and degreasing with WEICON Surface Cleaner). Best results are achieved if the adhesive surfaces are mechanically roughened. Some low-energy adhesives, especially PTFE and polyolefins, etc. can only be bonded after special pretreatment of the surfaces, e.g. with fluoridation, low-pressure plasma, corona, flame impingement, etc. The adhesive is applied on one side.

Delivered form:

65 g / 50 ml, PU-90, Art.-No.: 10751050
65 g / 50 ml, PU-240, Art.-No.: 10753050

Accessories:

Easy-Mix Dispensing Gun, Art.-No.: 10653050
Quadro Mixing Nozzle 16.L, Art.-No.: 10650005 WEICON Easy-Mix PU 240,高强度双组份聚氨酯粘合剂,wecon 10751050


WEICON, WEICONLOCK, 金属修补剂锌喷剂防卡剂金属修补棒环氧粘合剂红色高温硅胶

上海昆邦化工有限公司 版权所有 @2009-2011
联系人:蒋满平 电话:021-58528856 传真:021-58528166 手机:13788990268 电子邮件:578116175@qq.com